Trim, Doors & Millwork

Wood is a tremendously versatile material--and as long as it's protected, a strong and durable one. Traditional petroleum and acrylic-based coatings protect wood by forming a surface film, which repels water and UV rays, but also tend to prevent evaporation, trapping moisture in the wood and making it more prone to decay.  And, the paraffin waxes that protect against water in many water and solvent-based coatings are easily damaged by even minimal exposure to UV radiation.


Sansin's penetrating formulas let wood "breathe" more freely, improving dimensional stability and allowing wood to adjust naturally to moisture levels in the environment.  Sansin forms a monolithic bond with wood that aggressively repels condensed water while allowing moisture vapor to escape.  In addition, Sansin's modified natural oils and resins are impregnated with special UV protectants so every exposed cell is protected.  Because of their unique formulation, Sansin Enviro Stains help protect naturally against wood rot, giving your woods the long-lasting, beautiful protection it deserves, just as Mother Nature intended.

  • THE PERFECT FINISH FOR ANY PROJECT, OLD OR NEW

    SANSIN ENS is a durable two-coat finish that can be applied to virtually any exterior vertical surface, including wood or fiberglass windows and doors, garage doors, dry log substrates, trim, millwork, furniture and siding. Because of its excellent adhesion, it can be applied over competitive water- or oil-based products to improve the performance of those coatings. Whatever your project, the exceptional clarity and vibrant color of ENS--in natural, semi-transparent or solid finishes--will raise it to a new standard of beauty and durability. 

    ENS enhances the natural grain and character of your wood with a lustrous Gloss or Satin finish. Highly durable and low in VOCs, ENS is highly resistant to wear, doesn't discolor over time, and provides some of the toughest UV protection available. For even longer maintenance cycles on new build projects, undercoat Sansin ENS with SDF or Classic. For maximum performance during maintenance coats, use ENS Optimum Clear, a powerful, exceptionally clear UV topcoat that can be applied to almost any finish.   

    VOC Content: 66 g/L.  Sizes: Quarts, Gallons, 5-Gallons. Coverage: 300 sf per gallon, depending on surface porosity and method of application. Application: Flood coat to point of refusal with sprayer or brush; back brush drips and runs.  Soap and water clean up; washable as needed.

    Color: More than 90 natural, transparent and saturated colors.  


  • ENS NATURALS TOPCOAT is a clear, neutral finish that enhances the tone or color of natural wood over existing protective finishes. ENS Naturals Topcoat is a highly durable and attractive finish that will enhance the performance and sheen of surfaces finished with ENS, SDF, Classic or Dec. Because of its excellent adhesion, ENS Naturals Topcoat can be applied over many other transparent water- or solvent-based products. Use ENS Naturals Topcoat on exterior siding, decks, fences, windows, doors, furniture and timbers.

    VOC Content: 72 g/L. Sizes: Quarts, Gallons, 5-Gallons. Coverage: 250-400 sf per gallon in one coat, depending on surface porosity and method of application.  Application: Spray or brush.

    ENS OPTIMUM CLEAR COAT is a highly durable clear finish designed for maintenance of surfaces previously coated with ENS, SDF, Classic or Dec and other water- and solvent-based finishes. Optimum Clear Coat provides additional durability and UV resistance, with a Gloss or Satin finish. Excellent adhesion allows application to metal, fiberglass and composite substrates, in addition to wood windows and doors, garage doors, trim, millwork, furniture and siding.  

    VOC Content: 66 g/L. Sizes: Quarts, Gallons, 5-Gallons. Coverage: 250-400 sf per gallon in one coat, depending on surface porosity and method of application.  Application: Spray or brush.





© Casa Verde Paint 2016